Sony ILCE6000LB Camera Lens User Manual


 
Focuses automatically on a subject in all ranges of the image.
When you press the shutter button halfway down in still image shooting mode, a green frame is
displayed around the area that is in focus.
Zone:
Select a zone on the monitor on which to focus. A zone consists of nine focus areas, and the
product automatically selects a focus area on which to focus.
Center:
Focuses automatically on a subject in the center of the image. When used together with the AF
lock function, you can compose the image you want.
Flexible Spot:
Allows you to move the AF range frame to the desired point on the screen and focus on an
extremely small subject in a narrow area.
Note
When [Focus Mode] is [Continuous AF] and [Focus Area] is [Wide] or [Zone], the focus
range finder frame may change after the focus is achieved.
When [ AF Illuminator] is [Auto] and [Focus Area] is [Wide] or [Zone], an AF range finder
frame may be shown by the dotted line.
[48] How to Use
Using shooting functions Adjusting the focus
Focal plane phase detection AF
When there are focal plane phase detection AF points within the auto focus area, the product
uses the combined autofocus of the focal plane phase detection AF and contrast AF.
Note
When the aperture value is set to F13 or above, you cannot use the focal plane phase
detection AF. Only contrast AF is available.
Focal plane phase detection AF is available only when an applicable lens is attached. If you
use a lens that does not support focal plane phase detection AF, you cannot use [Automatic
AF], [ AF Track Duration] or [ AF drive speed].
Also, even if you use a previously purchased applicable lens, the focal plane phase detection
AF might not function unless you update the lens. For details on applicable lenses, refer to
the support page:
http://www.sony.co.jp/DSLR/support/
When you attach an A-mount lens (sold separately) with the Mount Adaptor (sold
separately), you cannot use the focal plane phase detection AF of this product.