Filter
Top Products
48
GB
connected, the built-in microphones
become disabled.
1 Connect an external equipment to the
PCM recorder in the stop mode.
Connect the audio output jacks (stereo
minijack) of external equipment to the
LINE IN jack of the PCM recorder using
a Sony audio connecting cable (not
supplied).
2 Set the REC LEVEL switch to “AUTO”
for automatic recording, or “MANUAL”
for manual recording.
3 Press z REC.
The PCM recorder enters the recording
standby mode.
4 Start playback with the connected
external equipment.
5 To start recording, press X PAUSE or
N PLAY/ENTER.
6 When “MANUAL” has been selected in
step 2, adjust the recording level with the
REC LEVEL dial.
7 To stop recording, press x STOP.
z Recommended audio connecting
cable (not supplied)
We recommend you use Sony RK-G129 audio
connecting cable (not supplied).
P Note
When both m (microphone) jack and LINE IN
jack are connected with an external
microphone and an external device
respectively, the input from the m
(microphone) jack has the priority. When
using the input from the LINE IN jack, remove
an external microphone from the m
(microphone) jack.