Sony PCM-M10 Camcorder User Manual


 
94
GB
Do not remove or insert a memory card
while recording or playing back files.
Do not remove a memory card while
“Accessing...” appears on the display
window or the ACCESS indicator is flashing
in orange. Otherwise, data may be damaged.
We do not guarantee the operations of all
types of compatible memory cards with the
PCM recorder.
M2™ card other than those manufactured by
Sony have not been demonstrated as
operable with the PCM recorder, and may
have problems when used with the PCM
recorder. For compatible M2™, please refer
to the Sony web site (page 95).
“MagicGate™” is copyright protection
technology that uses encryption technology.
The PCM recorder does not support data
recording/playback that requires
MagicGate™ functions.
The PCM recorder does not support parallel
data transfer.
A ROM (read-only-memory) type or write-
protected memory card is for playback only.
You cannot record or edit data on the card.
SonicStage will create a group on a Memory
Stick™ media. The group function,
however, cannot be used except with a
compatible device.
Data may be corrupted in the following
cases:
– When a memory card is removed or the
PCM recorder is turned off during a read
or write operation.
– When a memory card is used in locations
subject to static electricity or electrical
noise.
We assume no responsibility for any loss or
damage of recorded data.
We recommend that you save a backup copy
of the important data.
Do not touch the terminal of a memory card
with your hand or a metal object.
Do not strike, bend or drop a memory card.
Do not disassemble or modify a memory
card.
Do not expose a memory card to water.
Do not use a memory card under the
following conditions:
– Locations beyond the required operating
conditions, including locations such as the
hot interior of a car parked in the sun and/
or in the summer, the outdoors exposed to
direct sunlight, or a place near a heater.
– Humid locations or locations with
corrosive substances present.
When using a memory card, make sure to
check the correct insertion direction into the
memory card slot.