Filter
Top Products
Getting started
9
Preparing the power supply
Charging the battery pack
Your camera operates only with the “InfoLITHIUM” NP-FS11 battery pack* (S
series). You cannot use any other battery pack.
To remove the battery pack
Slide the battery pack in the direction opposite the
v
mark.
* What is “InfoLITHIUM”?
“InfoLITHIUM” is a lithium ion battery pack which can exchange information such as battery
consumption with compatible video equipment. This unit is compatible with the
“InfoLITHIUM” battery pack (S series). “InfoLITHIUM” S series battery packs have the
mark. “InfoLITHIUM” is a trademark of Sony Corporation.
1
Connect the AC power adaptor/charger and the wall outlet (mains).
2
Insert the battery pack in the direction of the
v
mark. Slide the
battery pack in the direction of the arrow.
The CHARGE lamp lights up when charging begins. When the CHARGE lamp
goes off,
normal charge
is completed. For
full charge
, which allows you to
use the battery longer than usual, leave the battery pack inserted for about one
hour after normal charge is completed.
AC-VF10 AC power adaptor/charger (supplied)
To the wall outlet
(mains)
Battery pack (S series)
CHARGE lamp
(orange)