Filter
Top Products
40
To set the manual focus
1 Press the FOCUS button repeatedly to select 9.
The manual focus bar appears.
2 Set the bar to the desired distance with b/B on the control button.
• If 9 flashes, it indicates the limitation of focus adjustment.
• Using the Expanded focus function (page 60), the image on the screen is expanded double to focus on
easily (The default setting).
3 Press z. 9 changes from yellow to white. To set again, press z again.
• Distance setting information in manual focus is approximate. If you point the lens up or down, the error
increases.
• The distance selection is limited according to the zoom scaling or the setting of the [Conversion Lens].
• Once you change a focus method, the distance of the manual focus you set up is cleared.
z Enhancing the outline of the subject that is visually in focus (Peaking)
The outline of the subject on the screen is enhanced using blue for easier focusing.
Set the peaking level with v/V on the control button while setting the manual focus.
( : The default setting)
Peaking High
Sets the peaking level high.
Peaking Low
Sets the peaking level low.
Peaking Off
Does not use the peaking function.
Peaking level
Focus indicator
(yellow: adjustable/white: fixed)
Manual focus bar
Focus range 2 to 90 cm:
Focus range 90 cm to :