Filter
Top Products
94
Viewing images
Deleting/editing an image
The date and time are
recorded incorrectly.
• The date and time are not set correctly. pSet the correct date and time (page 21).
Symptom Cause Solution
The image cannot be
played back.
• The mode selector is not set to .
• You cannot play back the image on the camera,
if it is modified on a computer or its folder/file
name is changed.
• The camera is in USB mode.
pSet the mode selector to (page 36).
—
pCancel USB communication (page 83).
The image is coarse right
after being played back.
— pThis is not a malfunction.
The images cannot be
played back on a TV.
• The [Video Out] setting for the camera in SET
UP is incorrect.
• The connection is not correct.
pSet [Video Out] to [NTSC] or [PAL] (page 107).
pCheck the connection (page 38).
The images cannot be
played back on a
computer.
— pSee page 95.
Unknown beeps are heard
from the camera while
viewing a movie.
• These beeps are heard when the auto focus is
working.
pThis is not a malfunction. Shoot in focus preset mode (page 49).
Symptom Cause Solution
Your camera cannot
delete an image.
• The image is protected.
• The write-protect switch on the “Memory Stick”
is set to the LOCK position.
pCancel the protection (page 67).
pSet it to the recording position (page 109).
You have deleted the
image by mistake.
• Once you have deleted an image, you cannot
restore it.
pProtecting the image can prevent accidental erasure (page 67).
pThe write-protect switch on the “Memory Stick” will prevent
you from deleting images by mistake (page 109).
Symptom Cause Solution