Sony DCM-M1 Camcorder User Manual


 
12
Step 1 Preparing the power supply
DISPLAY
CHANGE
DISPLAY
CHANGE
DISPLAY
CHANGE
BATTERY LIFE
m
TIME TO CHG
NORMAL
m
TIME TO CHG
FULL
hm
Playing time
MD DATA2 disc
Battery pack
Playing time Playing time
on LCD screen with LCD closed
NP-F550 (supplied) 80 (75) 100 (95)
Audio MD
Battery pack
Playing time Playing time
on LCD screen with LCD closed
NP-F550 (supplied) 100 (95) 135 (130)
•Approximate minutes when you use a fully charged battery
•Numbers in parentheses indicate the time using a normally charged battery.
•The battery life will be shorter if you use your camcorder in a cold environment.
To check charging
During charging, you can check the charging time on the display. BATTERY LIFE
lights up on the display shortly after charging has started.
Press DISPLAY CHANGE during charging.
Each time you press DISPLAY CHANGE, the display changes as follows.
The remaining battery time when the battery pack being charged is attached to an
“InfoLITHIUM” equipment.
The time is not displayed when the remaining
battery time is less than 5 minutes.
The remaining time until normal charge is
completed.
The remaining time until full charge is completed.