Sony DCM-M1 Camcorder User Manual


 
27
Recording – Basics
T
W
Using the zoom feature
(1) Move the power zoom lever a little for a slower zoom. Move it further for a
faster zoom.
Using the zoom function sparingly results in better-looking recordings.
“T” side:for telephoto (subject appears closer)
“W” side: for wide-angle (subject appears farther away)
Zoom greater than 10× is performed digitally, if you set D ZOOM to ON in the menu
settings. The digital zoom function is set to OFF as a default setting (p. 92).
When you shoot close to a subject
If you cannot get a sharp focus, move the power zoom lever to the “W” side until the
focus is sharp. You can shoot a subject that is at least about 2 feet 5/8 inch (about 80 cm)
away from the lens surface in the telephoto position, or about half an inch (about 1 cm)
away in the wide-angle position.
Notes on digital zoom
•Digital zoom starts to function when zoom exceeds 10x.
•The picture quality deteriorates as you go toward the “T” side. Set D ZOOM to OFF in
the menu settings. Otherwise the digital zoom activates without notice (p. 92).
The right-ended portion of the
bar shows the digital zooming
zone.
The digital zooming zone appears
when you set D ZOOM to ON.
Recording a picture
ZOOM
W
T