Filter
Top Products
84
(6) Touch PREVIEW.
The last 5 seconds of the track before the selected track, the selected track itself
and the first 5 seconds of the next track will be played back with the selected
effects.
(7) Confirm the playback, then touch BACK.
(8) Touch EXEC.
(9) Touch FINISH.
After the PLEASE WAIT message, which appears while the change is written
in the disc, the index display appears.
To not apply the scene transition effect
Select EFFECT OFF.
To operate the menu
You can use the control dial.
To cancel setting the effects
Touch CANCEL. All the settings you made so far is canceled.
Notes on cross-fade, cross-wipe and cross-dissolve effects
•Select the track which appears first when you set these effects.
•These effects are available only when you select a track followed by either a movie or
a photo track.
•These effects are canceled:
- if you set an IN-effect to its succeeding track.
- if you move the track.
- if you move or copy other track between the tracks.
Notes on wipe and cross-wipe effects
Touch the desired direction to switch.
You cannot set switching effects if:
•the disc is protected.
•the track is protected.
The switching effects will not be played back on:
•picture-in-picture, 2-picture and 9 FRAME SEQUENCE (including enlarged picture)
displays
•a photo set to play for one second
•a very short movie
To continue setting switching effects
Touch CONTINUE in step 9.
Switching the tracks with special effects
BACK
SCENE TRANSITION
WIPE IN
IN
OUT
EXECPREVIEW CANCEL
FADE OUT