Sony CCD-TRV408E Camcorder User Manual


 
111
Additional information Aanvullende informatie
Onderhoud en
voorzorgsmaatregelen
De ingebouwde oplaadbare
batterij in de camcorder opladen
Uw camcorder wordt geleverd met een
ingebouwde oplaadbare batterij die zorgt dat de
gegevens als datum en tijd e.d. bewaard blijven,
ongeacht de stand van de POWER schakelaar. Bij
gebruik van de camcorder wordt de batterij
steeds automatisch opgeladen. Als u de
camcorder helemaal niet gebruikt, zal de batterij
na ongeveer 6 maanden geheel leeg zijn. De
werking van de camcorder wordt daar verder
niet door verstoord. Maar om de gegevens als
datum en tijd e.d. in stand te houden, zult u het
lege batterijpak opnieuw moeten opladen, op een
van de volgende twee manieren.
De ingebouwde oplaadbare batterij laden:
Sluit de camcorder met de bijgeleverde
netspanningsadapter aan op het stopcontact en
laat het apparaat zo meer dan 24 uur
ongebruikt staan, met de POWER schakelaar in
de uit-stand.
Is er geen stopcontact in de buurt, plaats dan
een volledig opgeladen batterijpak in de
camcorder en laat het apparaat zo meer dan
24 uur ongebruikt staan, met de POWER
schakelaar in de uit-stand.
Charging the built-in
rechargeable battery in your
camcorder
A built-in rechargeable battery is supplied with
your camcorder so as to retain the date and time,
etc., regardless of the setting of the POWER
switch. The rechargeable battery is always
charged as long as you are using your camcorder.
The battery, however, will get discharged in
about 6 months if you do not use your camcorder
at all. Even if the rechargeable battery is not
charged, it will not affect the camcorder
operation. To retain the date and time, etc.,
charge the battery pack if the battery pack is
discharged.
Charging the built-in rechargeable battery:
Connect your camcorder to a wall socket using
the AC power adaptor supplied with your
camcorder, and leave your camcorder with the
POWER switch turned off for more than 24
hours.
Or install the fully charged battery pack in your
camcorder, and leave your camcorder with the
POWER switch turned off for more than 24
hours.
Maintenance information and
precautions