Filter
Top Products
27
DCR-DVD92/DVD103/DVD203/DVD403/DVD602/DVD653/DVD703/DVD803
2-587-622-11 (1)
Easy Handycam – using your camcorder with automatic settings
Operate your camcorder with ease
With this Easy Handycam operation, most of the camera settings are automatically adjusted
optimally, which frees you from detailed adjustment.
Since only basic functions become available and screen font size increases for easy viewing,
even first time users can enjoy easy operation.
Complete the preparations described in steps 1 to 8 (p.16 to 26) before operation.
•
When inserting a new DVD-RW, it formatted with VIDEO mode.
•
When using a DVD-RW disc formatted in VR mode, you cannot use the editing function (p.72).
If you do not intend to use the Easy Handycam operation, go to page 32.
1 Turn on the power by sliding the POWER switch
in the direction of the arrow while pressing the
green button in the center.
POWER switch
EASY button
MODE
OFF
ON
(CHG)
POWER
Green button
2 Press EASY.
Now try recording
To cancel Easy Handycam
Press EASY again.
The EASY lamp turns off.
•
If you turn off the power without canceling
Easy Handycam operation, your camcorder
turns on in Easy Handycam operation
automatically when you turn on the power.
During Easy Handycam operation
•
You cannot use some buttons or switches (p.28,
29), and some setup items (p.54).
•
If you set an invalid operation, [Invalid during
Easy Handycam operation] appears.
Easy Handycam– using your camcorder with automatic settings