Filter
Top Products
Recording
Recording
31
Recording still
images
– Memory photo recording
You can record still images on a “Memory
Stick Duo.” Before recording, follow steps 1
to 7 in “Getting started” (p. 15 to p. 25).
z Tip
• Performing Easy Handycam operation, even first time
users can record easily. For details, see page 34.
1 Set the LENS COVER switch to
OPEN.
2 Open the LCD panel.
3 Slide the POWER switch repeatedly
until the CAMERA-MEMORY lamp
lights up.
The selected recording folder is displayed.
4 Press and hold PHOTO lightly.
You will hear a light beeping sound when
the focus and brightness settings are
adjusted. Recording does not start at this
point.
*The number of images that can be recorded
varies depending on the image quality setting
and the recording environment.
5 Press PHOTO fully.
A shutter sound is heard. When bars of
disappear, the image is recorded on
the “Memory Stick Duo.”
To check the most recently recorded
image – Review
Touch .
Touch to return to standby.
To delete the image, touch , then [YES].
To cancel deleting, touch [NO].
To turn the power off
1
Slide the POWER switch up to the OFF
(CHG) position.
2 Set the LENS COVER switch to CLOSE.
To record still images continuously –
Burst
For DCR-HC40:
Select the (MEMORY SET) menu,
[STILL SET], then [ BURST] (p. 70).
You can record 3 to 13 images continuously in
a time interval of about 0.5 seconds.
POWER switch
PHOTO
LENS COVER switc
h
Slide the POWER
switch while
pressing the green
button.
30
P-MENU
60min
FINE
1152
101
The indicator
stops flashing.
The number of images
that can be recorded.*
,continued