Sony DCR-HC90 Camcorder User Manual


 
50
DCR-HC90 2-548-307-11(1)
TRAIL
Records a picture so that an incidental
image like a trail is left.
SLOW SHUTTR (slow shutter)
The shutter speed is slowed down. Suitable
for shooting a subject more clearly in a
dark place.
• Adjust the focus manually using a tripod since
adjusting the focus automatically is hard when
[SLOW SHUTTR] is selected. ([FOCUS], p.
42)
OLD MOVIE
Adds an old movie effect with a sepia hue
to pictures.
You cannot change to another digital effect
while recording pictures on a tape with
[CINEMA EFECT] selected.
The digital effect function is suspended while
using zoom with [DELAY MOTION] selected.
It is recommended that you mount your
camcorder on a tripod when you select
[DELAY MOTION].
You cannot select 16:9/4:3 as the aspect ratio
for [OLD MOVIE].
• You cannot record pictures edited using special
effects on the tape in your camcorder.
• You cannot add effects to externally input
pictures. Also, you cannot output playback
pictures edited with digital effects via the DV
Interface.
• You can save pictures edited using special
effects on a “Memory Stick Duo” (p. 63) or
record them on another tape (p. 61).
PICT. EFFECT (Picture effect)
You can add special effects to a picture
during recording or playback. appears.
OFF
Does not use [PICT. EFFECT] setting.
NEG.ART
The color and brightness are reversed.
SEPIA
Pictures appear in sepia.
B&W
Pictures appear in black and white.
SOLARIZE
Pictures appear as an illustration with
strong contrast.
PASTEL
Pictures appear as a pale pastel drawing.*
MOSAIC
Pictures appear mosaic-patterned.*
* Available during recording only.
• You cannot add effects to externally input
pictures. Also, you cannot output playback
pictures edited with picture effects via the DV
Interface.
• You can save pictures edited using special
effects on a “Memory Stick Duo” (p. 63) or
record them on another tape (p. 61).
FRAME REC (Frame recording)
You can record pictures with a stop-motion
animated effect by alternately frame
recording and then moving the subject a
little. Operate your camcorder using the
Remote Commander to prevent camera
shake.
Touch [ON] ( ) .
Press REC START/STOP.
A picture (approximately 6 frames) is
recorded, and your camcorder enters the
standby mode.
Move the subject and repeat step
.
• The remaining tape time will not be indicated
correctly.
• The last scene will be longer than other scenes.
PICT.APPLI. menu (continued)