Filter
Top Products
107
“Memory Stick
” Operations
Using a “Memory Stick” – Introduction
Notes
•When using the touch panel, press the LCD screen lightly with your thumb, the
supplied stylus (DCR-IP55 only) or index finger supporting the LCD screen from the
back side of it or press those buttons lightly with your index finger.
•Do not press the LCD screen with sharp objects other than the stylus supplied (DCR-
IP55 only).
•Do not press the LCD screen too hard.
•Do not touch the LCD screen with wet hands.
•If FN is not on the LCD screen, touch the LCD screen lightly to make it appear. You
can control the display with DSPL/TOUCH PANEL on your camcorder.
•When operation buttons do not work even if you press them, an adjustment is
required (CALIBRATION) (p. 203).
•When the LCD screen gets dirty, use the supplied cleaning cloth.
When executing each item
The green bar appears above the item.
If the items are not available
The color of the items changes to grey.
Touch panel
You can operate with the touch panel through the viewfinder (p. 73).
Press FN to display the following buttons:
In the memory camera mode
PAGE1 SPOT FOCUS, MENU, PLAY, INDEX, SPOT METER, EXPOSURE
PAGE2 SELFTIMER, PLAY, INDEX, MEM MIX
PAGE3 LCD BRT, PLAY, INDEX, VOL
In the memory playback mode
PAGE1 MENU, CAM, INDEX, DELETE,
+
,
–
PAGE2 PB ZOOM, CAM, INDEX, DATA CODE,
+
,
–
PAGE3 LCD BRT, CAM, INDEX, VOL,
+
,
–