Filter
Top Products
120
Viewing a still image
– Memory photo playback
You can play back still images recorded on a “Memory Stick.” You can also play back
6 images including moving picture in order at a time by selecting the index screen.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch
is set to the right (unlock) position.
(2) Press MEMORY PLAY. The last recorded image is displayed.
(3) Press MEMORY +/– to select the desired still image. To see the previous
image, press MEMORY –. To see the next image, press MEMORY +.
To stop memory photo playback
Press MEMORY PLAY.
Notes on the file name
•The directory is not displayed if the structure of the directory does not conform to the
DCF98 standard.
•“ - DIRECTORY ERROR” may appear on the LCD screen or in the viewfinder if
the structure of the directory does not conform to the DCF98 standard. While this
message appears, you can play back images but cannot record them on the “Memory
Stick”.
•The file name flashes on the LCD screen or in the viewfinder if the file is corrupted or
the file is unreadable.
To play back recorded images on a TV screen
•Connect your camcorder to the TV with the A/V connecting cable supplied with your
camcorder before operation.
•When operating memory photo playback on a TV or on the LCD screen, the image
quality may appear to have deteriorated. This is not a malfunction. The image data is
as good as ever.
•Turn the audio volume of the TV down before operation, or noise (howling) may be
output from the TV speakers.
Recording date
When you press DATA CODE on the Remote Commander, you can see the date of the
recording.
Image data modified with personal computers or shot with other equipment
You may not be able to play them back with your camcorder.
When no image is recorded on the “Memory Stick”
The message “ NO FILE” appears.
1
POWER
LOCK
VCR
MEMORY
CAMERA
OFF(CHR)
LOCK
PLAY
32