Filter
Top Products
24
— Playback – Basics —
Playing back a tape
You can monitor the playback picture on the LCD screen. If you close the LCD panel,
you can monitor the playback picture in the viewfinder. You can control playback using
the Remote Commander supplied with your camcorder.
(1) Install the power source and insert the recorded tape.
(2) Set the POWER switch to VCR while pressing the small green button.
(3) Open the LCD panel while pressing OPEN.
(4) Press m to rewind the tape.
(5) Press N to start playback.
(6) To adjust the volume, press either of the two buttons on VOLUME.
To stop playback
Press x.
When monitoring on the LCD screen
You can turn the LCD panel over and move it back to the camcorder body with the LCD
screen facing out.
If you leave the power on for a long time
Your camcorder becomes warm. This is not a malfunction.
When you open or close the LCD panel
Make sure that the LCD panel is set vertically.
4 5
6
2
1
3
POWER
LOCK
VCR
MEMORY
CAMERA
OFF(CHR)
VOLUME
REW PLAY