Filter
Top Products
139
Additional Information Дополнительная информация
English
Self-diagnosis display
Five-digit display Cause and/or Corrective Actions
• You are using a battery pack that is not an “InfoLITHIUM”
battery pack.
c Use an “InfoLITHIUM” battery pack. (p. 14)
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at least 1
hour to acclimatize. (p. 151)
• The video heads are dirty.
c Clean the heads using the Sony DVM12CL cleaning cassette
(not supplied). (p. 152)
• A malfunction other than the above that you can service has
occurred.
c Remove the cassette and insert it again, then operate your
camcorder.
c Disconnect the power cord of the AC adaptor or remove the
battery pack. After reconnecting the power source, operate
your camcorder.
• A malfunction that you cannot service has occurred.
c Contact your Sony dealer and inform them of the 5-digit
code. (example: E:61:10)
If you are unable to rectify the problem even if you try corrective actions a few times, contact your
Sony dealer.
Your camcorder has a self-diagnosis display
function.
This function displays the current condition of
your camcorder as a 5-digit code (a combination of
a letter and figures) in the viewfinder or on the
LCD screen. If a 5-digit code is displayed, check
the following code chart. The last two digits
(indicated by ss) will differ depending on the
state of your camcorder.
C:21:ss
Viewfinder (or LCD screen)
Self-diagnosis display
•C:ss:ss
You can service your camcorder
yourself.
•E:ss:ss
Contact your Sony dealer.
E:61:ss
E:62:ss
C:31:ss
C:32:ss
C:04:ss
C:22:ss
C:21:00