Filter
Top Products
Quick Start Guide
11
Recording a still image on “Memory Stick” (p. 126)
When you purchase your camcorder, the clock setting is set to off. If you want to record the date
and time for a picture, set the clock setting before recording (p. 20).
NOTE
Do not pick up your camcorder by
holding the viewfinder, the flash,
the LCD panel or the battery pack.
Monitoring the playback still image on the LCD
screen (p. 156)
VCR
MEMORY/
NETWORK
CAMERA
OFF(CHG)
POW
ER
PLAY PB
1 Set the POWER
switch to MEMORY/
NETWORK
(DCR-TRV50 only)
or VCR while
pressing the small
green button.
2 Press PLAY or PB. The last recorded
image is displayed.
VCR
MEMORY/
NETWORK
CAMERA
OFF(CHG)
PO
W
ER
1 Remove the lens cap.
3 Press OPEN
to open the
LCD panel.
The picture
appears on
the screen.
Viewfinder
When the LCD panel is closed,
use the viewfinder with your
eye against the eyecup.
Adjust the viewfinder lens to
your eyesight (p. 30).
2Set the POWER switch
to MEMORY/
NETWORK (DCR-
TRV50 only) while
pressing the small green
button.
Make sure that the
LOCK switch is set to
the left (unlock)
position.
4 Press PHOTO
lightly.
5 Press PHOTO
deeper.
or