Sony DCR-VX2100E Camcorder User Manual


 
Additional Information / Дополнитeльнaя инфоpмaция
219
Troubleshooting
Symptom
The cassette cannot be removed
from the holder.
The % and Z indicators flash and
no functions except for cassette
ejection work.
indicator does not appear
when using a tape with cassette
memory.
Remaining tape indicator is not
displayed.
When operating using the “Memory Stick”
Symptom
Operations do not function.
Recording does not function.
The image cannot be deleted.
You cannot format the “Memory
Stick.”
Deleting all the images cannot be
carried out.
You cannot protect the image.
You cannot write a print mark on
the still image.
(continued on the following page)
Cause and/or Corrective Actions
The power source is disconnected.
c Connect it firmly. (p. 13, 18)
The battery is dead.
c Use a charged battery pack. (p. 13, 14)
Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at least one hour
to acclimatize. (p. 234)
The gold-plated connector of the tape is dirty or dusty.
c Clean the gold-plated connector. (p. 213)
The q REMAIN is set to AUTO in the menu settings.
c Set it to ON to always display the remaining tape indicator. (p. 156)
Cause and/or Corrective Actions
The POWER switch is set to CAMERA or OFF (CHG).
c Set it to MEMORY or VCR.
The “Memory Stick” is not inserted.
c Insert a “Memory Stick.” (p. 173)
The “Memory Stick” has already been recorded to its full capacity.
c Erase unnecessary images and record again. (p. 177, 204)
The “Memory Stick” formatted incorrectly is inserted.
c Format the “Memory Stick” or use another “Memory Stick.” (p. 160)
The write-protect tab on the “Memory Stick” is set to LOCK.
c Set the tab to write. (p. 170)
The image is protected.
c Cancel image protection. (p. 202)
The write-protect tab on the “Memory Stick” is set to LOCK.
c Set the tab to write. (p. 170)
The write-protect tab on the “Memory Stick” is set to LOCK.
c Set the tab to write. (p. 170)
The write-protect tab on the “Memory Stick” is set to LOCK.
c Set the tab to write. (p. 170)
The write-protect tab on the “Memory Stick” is set to LOCK.
c Set the tab to write. (p. 170)
The image to be protected is not being played back.
c Press MEMORY PLAY to play back the image. (p. 193)
The write-protect tab on the “Memory Stick” is set to LOCK.
c Set the tab to write. (p. 170)
The image that you will write a print mark is not being played back.
c Press MEMORY PLAY to play back the image. (p. 193)