Sony MVC-FD90 Digital Camera User Manual


 
masterpage:Left
filename[D:\nakano's\3060831121\3060831121MVCFD85UC\07add.fm]
54
model name1[MVC-FD85/FD90]
[3-060-831-12(1)]
If moisture condensation occurs
Immediately eject the floppy disk, then
turn off the camera and wait about an
hour for the moisture to evaporate.
Note that if you attempt to record with
moisture remaining inside the lens, you
will be unable to record clear images.
Unplug the unit from the wall outlet
(mains) when you are not using the
unit for a long time. To disconnect
the power cord (mains lead), pull it
out by the plug. Never pull the power
cord (mains lead) itself.
Do not operate the unit with a
damaged cord (mains lead) or if the
unit has been dropped or damaged.
Do not bend the power cord (mains
lead) forcibly, or place a heavy object
on it. This will damage the cord
(mains lead) and may cause fire or
electrical shock.
Prevent metallic objects from coming
into contact with the metal parts of
the connecting section. If this
happens, a short may occur and the
unit may be damaged.
Always keep metal contacts clean.
Do not disassemble the unit.
Do not apply mechanical shock or
drop the unit.
While the unit is in use, particularly
during charging, keep it away from
AM receivers and video equipment.
AM receivers and video equipment
disturb AM reception and video
operation.
The unit becomes warm during use.
This is not a malfunction.
Do no place the unit in locations that
are:
Extremely hot or cold
Dusty or dirty
Very humid
Vibrating
Use only the specified charger with
the charging function.
To prevent accident from a short
circuit, do not allow metal objects to
come into contact with the battery
terminals.
Keep the battery pack away from fire.
Never expose the battery pack to
temperatures above 60 °C (140 °F),
such as in a car parked in the sun or
under direct sunlight.
Keep the battery pack dry.
Do not expose the battery pack to any
mechanical shock.
Do not disassemble nor modify the
battery pack.
Attach the battery pack to the camera
securely.
Charging while some capacity
remains does not affect the original
battery capacity.
Your camera is supplied with a
vanadium-lithium battery installed so
as to retain the date and time, etc.,
regardless of the setting of the POWER
switch. The vanadium-lithium battery
is always charged as long as you are
using your camera. The battery,
however, will get discharged gradually
if you do not use your camera. It will
be completely discharged in about six
months if you do not use your camera
at all. Even if the vanadium-lithium
battery is not charged, it will not affect
the camera operation. To retain the
date and time, etc., charge the battery if
the battery is discharged.
On AC power adaptor
On battery pack
On vanadium-lithium battery
01cov.book Page 54 Monday, March 13, 2000 9:21 AM