Filter
Top Products
76
Five-digit display Cause and/or Corrective Actions
• Moisture condensation has occurred.
m Remove the cassette and leave the camcorder for at least
1 hour. (p. 67)
• The video heads are dirty.
m Clean the heads using the Sony V8-25CLH/V8-25CLD
cleaning cassette (not supplied). (p. 68)
• You are using a battery pack that is not an
“InfoLITHIUM” battery pack.
m Use an “InfoLITHIUM” battery pack. (p. 66)
• A servicable situation not malfunctioned above has
occurred.
m Remove the cassette and insert it again, then operate the
camcorder.
m Disconnect the power cord of the AC power adaptor or
remove the battery pack. After reconnecting the power
source, operate the camcorder.
• A camcorder malfunction which you cannot service has
occurred.
m Contact your Sony dealer or local authorized Sony
service facility and inform them of the five digits.
(example: E:61:10)
The camcorder has a self-diagnosis display.
This function displays the camcorder’s condition
with five digits (a combination of a letter and
figures) in the viewfinder, on the LCD screen or in
the display window. If this occurs, check the
following code chart. The five-digit display
informs you of the camcorder’s current condition.
The last two digits (indicated by ππ) will differ
depending on the state of the camcorder.
Self-diagnosis display
C:21:ππ
If you are unable to resolve the problem, contact your Sony dealer or local authorized
Sony service facility.
LCD screen
Self-diagnosis display
•C:ππ:ππ
You can service the camcorder
yourself.
•E:ππ:ππ
Contact your Sony dealer or local
authorized Sony facilitiy.
C:21:00
E:61:ππ
E:62:ππ
C:31:ππ
C:32:ππ
C:23:ππ
C:22:ππ