Filter
Top Products
Left Control Set
FOCUS Switch
N - Slide switch forward and hold to put camcorder into manual focus and
move focus point closer to camcorder.
F - Slide switch backward and hold to put camcorder into manual focus and
move focus point further from camcorder.
MOM. AF / AF LOCK Switch
MOM. AF - Slide switch forward and hold to put camcorder into
“momentary auto focus”. Camcorder remains in auto focus as long as the
switch is held forward. Once released, the camcorder switches to manual
focus. This is useful in stopping the camcorder from “seeking” when filming
in a low contrast environment. To return the camcorder to auto focus, slide
MOM. AF / AF LOCK switch backward to the AF LOCK position and
release.
AF LOCK - Slide switch reward to return camcorder to auto focus from
manual focus.
Front Plate
1) Microphone - Records sound to a depth of 80ft.
2) Flip filter - Rotate lever to engage or disengage color correction filter.
3) ON Button - Camcorder will be on and in Camera mode when properly
installed into the housing. Press the ON button once to turn the camcorder
on after camcorder has been turned off by the MODE/OFF switch, or if
camcorder has automatically shut down.
12. Slide Camera Tray forward until Release Button engages.
13. Rotate camcorder power switch to Memory.
Although camcorder Power switch is set to Memory, when
camcorder initially interfaces with Stingray, it will be in
Camera mode.
14. Replace rear plate.
A. Perform an o-ring inspection.
B. Align guide pins into base of Camera Tray.
C. Rotate both latches evenly until they lock. Ensure rear plate draws in
straight and that o-rings seat evenly.
Operation
The Stingray housing is designed to access basic camcorder features using
electromagnetic switch control sets (left and right side of Stingray) and
mechanical interfaces (front plate).
Right Control Set Controls
ZOOM Switch
T - Slide forward and hold for telephoto (subjects appear closer).
W - Slide rearward and hold for wide angle (increases viewing angle).
MODE/OFF - REC/PHOTO
MODE/OFF
Slide switch backward and release to toggle between Camera and Memory
modes.
Slide switch backward and hold for three seconds to turn camcorder off.
REC/PHOTO
In Camera mode, slide switch forward and release to toggle between record
and stand-by modes.
In Memory mode, slide switch forward and release to capture an image to
Memory Stick.
$