Filter
Top Products
21
Basic operations
When monitoring on the LCD screen
You can turn the LCD panel over and move back to the camcorder with the LCD screen
facing out [a]. You can adjust the angle of the LCD screen by turning the LCD screen
up to 15 degrees [b].
Using the remote commander
– CCD-TRV36/TRV43/TRV46 only
You can control playback using the supplied Remote Commander. Before using the
Remote Commander, insert the size AA (R6) batteries.
Note on DISPLAY button
Press DISPLAY to display the screen indicators on the LCD screen. To erase the
indicators, press DISPLAY again. If the POWER switch is set to CAMERA, you can
erase the indicator by pressing DISPLAY.
Using an earphone
Connect an earphone (not supplied) to the @ jack. You can adjust the volume using
VOLUME. When you use an earphone, the sound does not come from the speaker.
To view the playback picture in the viewfinder
Close the LCD panel. The viewfinder turns on automatically. When using the
viewfinder, you can monitor sound only by using an earphone.
To view on the LCD screen again, open the LCD panel. The viewfinder turns off
automatically.
Note on the lens cover
The lens cover does not open when the POWER switch is set to PLAYER. Do not open
the lens cover manually. It may cause malfunction.
Playing back a tape
[a] [b]
15°