Filter
Top Products
108
Icon/item
HiFi SOUND
TBC*
TBC stands for “Time Base Corrector”.
DNR*
DNR stands for “Digital Noise Reduction”.
AUDIO MIX
A/V t DV OUT
PB MODE
Mode
z STEREO
1
2
z ON
OFF
z ON
OFF
—
z OFF
ON
z AUTO
/
Meaning
To play back a stereo tape or dual sound track
tape with main and sub sound (p. 188)
To play back a stereo tape with the left sound or
a dual sound track tape with main sound
To play back a stereo tape with the right sound
or a dual sound track tape with sub sound
To correct jitter
To not correct jitter. Set TBC to OFF when
playing back a tape on which you have dubbed
over and recorded the signal of a TV game or
similar machine.
To reduce picture noise
To reduce a conspicuous afterimage when the
picture has a lot of movement
To adjust the balance between the stereo 1 and
stereo 2
To output digital images and sound in analog
format using your camcorder
To output analog images and sound in digital
format using your camcorder (p. 88)
To automatically select the system (Hi8/
standard 8 or Digital8 ) that was used to
record on the tape, and play back the tape
To play back a tape that was recorded in the
Hi8/standard 8 system when your camcorder
does not automatically distinguish the recording
system
POWER
switch
VCR
VCR
VCR
VCR
VCR
VCR
* When you play back tapes recorded in the Hi8/standard 8 system only
Notes on AUDIO MIX
•When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.
•You can adjust the balance only for tapes recorded in the Digital8 system.
Note on PB MODE
The mode will return to the default setting when:
– you remove the battery pack or power source.
– you turn the POWER switch.
ST1 ST2
Changing the menu settings