Filter
Top Products
185
Troubleshooting
Warning indicators and messages
If indicators and messages appear on the screen or in the display window, check the
following.
See the page in parentheses “()” for more information.
Warning indicators
100-0001 Warning indicator as to file
(except DCR-TRV240)
Slow flashing:
•The file is corrupted.
•The file is unreadable.
•You are trying to use the MEMORY MIX
function on a moving picture (p. 131).
C:21:00 Self-diagnosis display (p. 184).
E Warning indicator as to battery
Slow flashing:
•The battery is nearly dead.
The E indicator sometimes flashes even if
the remaining battery time is about five to
10 minutes depending on the operating
conditions, environment and battery
condition.
Fast flashing:
•The battery is dead.
% Moisture condensation has occurred*
Fast flashing:
•Eject the cassette, turn off your camcorder,
and leave it for about one hour with the
cassette compartment open (p. 194).
Warning indicator as to “Memory
Stick”* (except DCR-TRV240)
Slow flashing:
•No “Memory Stick” is inserted.
Warning indicator as to “Memory Stick”
formatting (except DCR-TRV240)
Fast flashing:
•“Memory Stick” data is corrupted (p. 116).*
•“Memory Stick” is not formatted correctly
(p. 111).
C:21:00100–0001
Q Warning indicator as to tape
Slow flashing:
•The tape is near the end.
•No tape is inserted.*
•The write-protect tab on the cassette is
exposed (red) (p. 20).*
Fast flashing:
•The cassette has run out of tape.*
Z You need to eject the cassette*
Slow flashing:
•The write-protect tab on the cassette is
exposed (red) (p. 20).
Fast flashing:
•Moisture condensation has occurred
(p. 194).
•The cassette has run out of tape.
•The self-diagnosis display function is
activated (p. 184).
- The image is protected*
(except DCR-TRV240)
Slow flashing:
•The image is protected (p. 170).
Warning indicator as to the flash
(optional)
Fast flashing:
•There is something wrong with the external
flash (optional).
* You hear the melody or beep.