Filter
Top Products
XCI-SX1 SDK / SDK Technical Manual
And finally, run make modules_install to copy all build modules to
/lib/modules/2.4.18_mvl30-pc_target/ directory. Please copy
this directory to the target system directory.
2.3 Environment System Configurations
The SDK is installed some software and applied some settings.
2.3.1 Kernel Files
The target file system needs to be configured due to the kernel updates
made. To be sure, copy the following files to its proper destination.
bzImage
Source:
Destination:
/usr/src/linux/arch/i386/boot
/boot/k1
2.3.2 GRUB Configurations
This GRUB configuration file in /boot/grub/grub.conf should contain
settings as shown below:
-----------------------------------------------------------
default=0
timeout=3
title XCI-SX1 Smart Camera SDK (0.6)
root (hd0,0)
kernel /boot/k1 rw root=/dev/hda1 bigphysarea=1280
-----------------------------------------------------------
2.3.3 Required Modules
To load the proper modules during start up, the /etc/modules file
should be edited to look like the configuration below:
9