Introduction
♦
FCC Information
This equipment has been tested and found to comply with the limits of a class A digital device, pursuant to
part 15 of the FCC rules and also guaranteed with CE approval. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his or her own expense.
The user's manual or instruction manual for an intentional or unintentional radiator shall caution the user that
changes or modifications not expressly approved by the party responsible for compliance could void the
users' authority to operate the equipment.
♦
Warning
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
This symbol alerts the user to the presence of non-insulated dangerous voltage within the
product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
This symbol alerts the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
►Handle the camera with care.
Be careful while handling or installing the camera. Do not drop it or subject it to strong shock or vibration to
prevent any damages to it. Do not disassemble it or place it on an unstable base.
►Never face the camera toward the sun.
The camera's picture may be influenced when working in unusual brightness environment. Sun light may do
influence on the picture quality or camera itself. Never aim the camera at the sun or other extremely bright
objects whether it is in use or not.
►Cleaning.
Do not touch the surface of CCD sensor by hand directly. Using lens tissue or a cotton tipped applicator and
ethanol to clean the CCD sensor and camera lens. When the camera is not in use, always put the cover cap on
the lens mount.
►Operation temperature.
This camera is designed for use in general purpose indoor CCTV application. Only operate your camera
between the temperature of -10℃ to +60℃(14℉ to 140℉)
Speco Technologies CVC-614C : CVC-865DN/24
Instruction Manual
3