Installation Guide
♦
Installing the lens
1. Remove the lens cap from the front of the camera.
2. If you are using a C mount lens, screw the lens directly into the camera.
3. If you are using a CS mount lens, remove the C mount lens ring adapter.
4. When using a fixed iris lens, switch the shutter control to AES ON.
5. When using a manual adjustable iris lens, switch the shutter control to AES OFF.
6. When using a Video servo auto iris lens or DC servo auto iris lens, switch the shutter control
to AES OFF.
♦
Auto iris lens connection
1. When using auto iris lens (with EE amp)
Set the lens selector to the "Video" position.
PIN
DEFINITION LENS CABLE LEAD
1
DC +12 V Red
2
Video iris White
3
NC -
4
Ground Black
2. DC servo auto iris lens (without EE amp)
Set the lens selector to the "DC" position.
PIN
DEFINITION
1
Damping -
2
Damping +
3
Driving+
4
Driving-
To ensure correct lead connection, please refer to the instructions on the lens.
Speco Technologies CVC-614C : CVC-865DN/24
Instruction Manual
9