Filter
Top Products
TROUBLESHOOTING
16
If you have trouble operating your camera, refer to the following
Problem Solution
Nothing appears on
the screen.
● Check that the power cord and line connection
between the camera and monitor are correct
● Check that you have properly connected VIDEO
cable to the camera VIDEO output jack.
The image on the
screen is dim.
● Is the lens stained with dirt? Clean your lens with
soft, clean cloth.
● Set the monitor for the proper conditions.
● If the camera is exposed to too strong light
change the camera position.
● Adjust the lens’ focus.
The image on the
screen is dark.
● Adjust the contrast feature of the monitor.
● If you have an intermediate device, set the
75Ω/Hi-z properly.
The camera is not
working properly,
and
the surface of the
camera is hot.
● Check that you have properly connected
the camera to an appropriate power source.
MOTION DETECTION
function is not active.
● Have you set ‘MOTION DET.’ menu to off?
● Have you set ‘MD LEVEL’ to too low?
● Have you set ‘MD AREA’ properly