SVAT Electronics Q1404 Security Camera User Manual


 
www.svat.com
6. AUTO ADJUST
- Press SETUP key to enter the AUTO ADJUST sub-menu
- Press the keys to choose desired item that needs adjusting
- Press the keys to change the value of each item
- Press the SETUP key to save and go back to the main menu
7. ALARM HISTORY
- Press SETUP key to enter the ALARM HISTORY sub-menu
- Press the keys to scroll through different pages
- Press the MODE button to clear the history records
- Press the SETUP key to save and go back to the main menu
8. EXIT
- Press SETUP key to exit the system setup
Please read this manual carefully before using this product. If you have any difficulties using this unit,
please consult the following checklist.
No Picture or Sound:
- Make sure the power cable is properly plugged in.
- Try adjusting the brightness as it may be turned all the way down.
- Double check all the camera wiring is plugged in correctly.
- Press any of the four channel buttons CH1-CH4 to turn switch to a desired camera.
Care and maintenance
Keep all parts and accessories out of reach of young children.
Do not attempt to open the case. Non-expert handling of the device
may damage it.
Do not use or store in dusty, dirty or moist areas. This is an indoor unit.
Do not store in hot areas. High temperatures can shorten the life of
electronic devices and warp or melt certain plastics.
Do not store in very cold areas. When the system warms up
(to its normal temperature), moisture can form inside the case, which
may damage electronic circuit boards.
Do not drop, knock, or shake it. Rough handling can break internal
circuit boards.
Do not use harsh chemicals, cleaning solvents, or strong detergents
when cleaning.
Operate this product using only the power supply included with it or
provided as an accessory.
SYSTEM SETUP (continued)
TROUBLESHOOTING
8