Filter
Top Products
UC1700
4
SVAT ELECTRONICS
Now You Can See
FUNCTION OF EACH P
FUNCTION OF EACH P
ART
ART
SWITCHABLE NTSC/PAL
The two most common video standards used are NTSC and PAL. NTSC is the video
system or standard used in North America and most of South America. PAL is the
predominant video system or standard mostly used in Europe. Please select and switch
to the system that best suits your location.
FULL STOP/OVERWRITE SWITCH
To select whether to overwrite the recorded memories or to stop recording when memory
is full. One may select “Overwrite”, and the memory will be overwritten starting with the
oldest data first. Selecting “Full Stop” will cause the RECORD mode to STOP mode
when the memory is full, and the REC LED will be unlit.
RCA VIDEO OUTPUT
To enable monitoring functions, connect one terminal to the RCA video out jack and the
other terminal to the monitor (TV) video IN.
ON/OFF POWER SWITCH
Select “ON” to switch on the device, and “OFF” to switch the device off.
OPTIONAL 12V DC POWER IN JACK
This jack is optional if you would rather use the adapter as the power source. If you prefer
not to use the 12V adapter, you have the option of using 4 AA batteries. (not included)
LED OPERATION MODE INDICATORS
LED light easily allows the user to distinguish the current system status. For example
REC LED: when the LED lights up, this indicates that the unit is recording. When the
LED is off, it indicates that the unit is not recording.
VCR TYPE CONTROLS
Stop, Record, Play, Pause, Fast Forward, Rewind and Skip buttons allow you to control
the UC1700 like a VCR. Buttons most commonly used are STOP and REC. For more
details, refer to the operating procedure function description table.
LED POWER INDICATOR
When the LED is lit up, it indicates that the device is powered up or turned ON. When
the LED light not lit, it indicates that the power is insufficient or turned OFF.