SVAT Electronics UC1700 Security Camera User Manual


 
UC1700
6
SVAT ELECTRONICS
Now You Can See
OPERA
OPERA
TION
TION
DESCRIPTION
DESCRIPTION
POWER ON
Each time immediately after power is restored; they system proceeds with auto detection
and warming up function, and then enters RECORD mode.
RECORD MODE
Under the RECORD mode the system uses two types of recording format: Continuous
Recording and Motion Detection Recording. The recording format depends on the
<RECORD MODE> settings on the SETUP mode. The interval of the captured frames
depends on the <CAPTURE RATE> settings on the SETUP mode.
When recording has been set as continuous recording, for every fixed period of time the
system will automatically record one frame and when recording is set to Motion Detection
recording, for a fixed period of time the system will automatically detect any changes on
the screen (Motion Detection Sensitivity Rate is adjustable according to preference).
When the memory is full and the
“Full Stop-Overwrite” switch on the front panel is
switched to “Overwrite”, the memory will be overwritten starting with the oldest data
first, or switch to “
Full Stop”, where it will automatically enter STOP mode and not
record any new date.
Under record mode, press << >> button to enter STOP mode.
1) Record Status:
MD-Motion Detection Recording
CNT-Continuous Recording
2) Image Resolution:
640x480
320x240
3) Image Quality:
HIGH, MEDIUM and LOW
REC ..
2004 /04/07 12:10 :10
MD
640x480
/H I 190 93.4
%
(4) (5)(1) (2) (3)