TANDBERG 770 Digital Camera User Manual


 
96
TANDBERG Videoconferencing SystemPeripherals
Document camera
A document camera can be used for showing text, diagrams and a variety of graphical material as well as small
three-dimensional objects. To use a document camera with your system:
Connect the document camera to the DocCam input on the Codec.
• Press DOC CAM on the remote control to select the document camera as the video source.
• See also ‘Presentations’ for easy access to still image transfer from document camera.
If you want to use S-Video from the document camera, you can connect the document camera to the Aux input
on the codec and set ‘Document Camera: Video2’ in ‘Video Settings’. Pressing DOC CAM on the remote control
will then activate the S-Video input on the codec.
doc cam
Tracker
The Tracker is a small infrared remote control device made to used to steer the system
camera to any desired location within the room. Typically, several Trackers would be used
with each system.
Each Tracker has two buttons:
One button to point the camera at a specific person/location.
One button to point the camera at all participants.
Beneath the battery in the tracker, there is a switch which can be set to 16 different positions
between 0 and F. For preset 10 to 15, the numbers 9 to F should be selected. Please refer also to
‘Presets’ in the ‘General Use’ - section.
For more information, contact your local TANDBERG representative.
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F