Filter
Top Products
14
VIEWING THE PHOTOS and VIDEOS
After your camera has been operating for awhile, you will of course want
to review the photos and/or videos it has been capturing. This can be
done by either of two methods, according to your preference or the
availability of accessory equipment:
Using an SD Card Reader
Push the SD card in slightly to release it then pull it out gently.
Put the SD card into any of the widely available SD card readers (either
a dedicated SD card reader or “multi-card reader” that features slots for
several dierent memory cards, including SD cards.
Follow the card reader supplier’s directions to view or download the
photo and/or video les on the SD card.
Connecting the Camera to Your Computer via USB
Slide the Power switch to the “ON” position, then press the SETUP button.
Connect your camera’S USB port (left side near the display with camera
unlatched and open) to a PC or Mac computer with a USB cable (not
included, available at most electronics/computer retailers) that has a
“Mini-B” USB plug on one end (camera) and a “Standard-A” USB plug
at the other end (computer). The PC will recognize the camera as an
external storage device, using the “USB Mass Storage” standard (no driver
installation necessary-not compatible with Windows 98 or earlier). The
PC will display a new disk symbol under “My Computer” or in Windows
Explorer (Macs-new disk appears on the desktop), and you will see a dialog
window on your desktop with several options to view, move, or copy the
photo and video les that are stored on the SD card. The camera’s LCD
will display “STO”, meaning the camera is in mass storage mode.