Tasco 119223C Digital Camera User Manual


 
9
CAMERA SETUP (continued)
you’ve saved any you wish to keep.
The display will read “FoNo”, with “No” and the SD card icon •
blinking. Press OK when “No” is ashing if you don’t want to format
the card.
To format the card, press either UP/DOWN button and the “Fo” •
portion will blink. Press OK and the display will change to “Y N” with
the SD card icon blinking.
“N” (NO) is the default, so pressing OK will cancel the formatting, •
then pressing and holding MENU will exit menu mode.
If you are certain that you want to format the card and DELETE all •
data and images on the card, then press either UP/DOWN button to
select “Y” (YES). With “Y” ashing, press OK- the display will briey
change to “SdFr”.
Exiting the Setup Menu
Press and hold MENU to exit Menu mode at any time once you have
nished changing any of the menu item settings or using one of the
menu options.
In normal operating mode, the display will only show the still photo or
movie clip icon in the lower left corner, an SD card icon on the lower right,
and one or more digits that indicate how many photo or movie les have
been stored on the card.