Technicolor - Thomson 5400LDK Camcorder User Manual


 
2-12 Operator's Manual LDK 5400 - Triax Adapter for LDK 100 Series Assembling the Units
Top Light
To mount a top light
1
onto the camera, proceed as
follows:
a. Screw the top light
1
into either the WW1/4”-20
screw hole
2
located on the carrying handle or the
screw hole
2
on the top of the microphone holder.
b. Power the top light according to the instructions
delivered with the light.
Script board
To mount the optional Script board (LDK 6985/21) onto
the camera proceed as follows:
a. Secure the Script board to the top-rear of the
camera with the quick mount adapter
1
.
b. Connect Script board light cable to the script light
connector
2
at the rear of the camera.
Caution
Ensure that the script light does not use
more than 3W of power.
The script light is switched on and off, and the intensity
is varied with the knob
3
at the rear of the Script board.
The retaining rings and clip
4
can be screwed onto the
right or left side if required.
1
1
1
2
2
2
3
4