Technicolor - Thomson VMD 6 Camcorder User Manual


 
38 EN
C
E
A
X
N
E
C
C
D
E
U
S
L
T
C
E
MENU
P
L
A
Y
O
F
F
001 FX 002 SX
003 S
005 F
004 F
EXIT
006 F
<
DELETE
>
Deleting Images
Previously shot images can be deleted either one at a time
or all at once.
1
Set the VIDEO/DSC Switch to , then set the
Power Switch to while pressing down the
Lock Button.
A stored image is displayed.
2
Press MENU/BRIGHT. The Menu Screen appears.
Rotate it to select and press it. DSC MENU
appears.
3
Rotate MENU/BRIGHT to select DELETE and press
it. The Sub Menu appears.
TO SELECT AN IMAGE BY BROWSING
IMAGES STORED IN MEMORY
Before doing the following, perform steps 1 through 3 above.
4
Rotate MENU/BRIGHT to select SELECT and press
it. The DELETE Index Screen appears.
5
Rotate MENU/BRIGHT to move the green frame to the
desired image that you wish to delete and press it. An
appears above the selected image.
Repeat this procedure for all images that you wish to
delete.
To deselect an image, press MENU/BRIGHT again.
The disappears.
6
Rotate MENU/BRIGHT upward to select NEXT and
press it. The Deletion Confirmation Screen appears.
7
Rotate MENU/BRIGHT to select EXECUTE and
press it. The selected images are deleted and the
normal playback screen appears.
To cancel deletion, rotate MENU/BRIGHT to select
CANCEL and press it.
TO DELETE ALL IMAGES
Before doing the following, perform steps 1 through 3 above.
4
Rotate MENU/BRIGHT to select ALL and press it.
The Deletion Confirmation Screen appears.
5
Rotate MENU/BRIGHT to select EXECUTE and
press it. All the images are deleted and the normal
playback screen appears.
To cancel deletion, rotate MENU/BRIGHT to select
CANCEL and press it.
NOTES:
Protected images (
pg. 37) cannot be deleted with the
above operation. To delete them, remove protection first.
Once images are deleted, they cannot be restored.
Check images before deleting.
Power Switch
MENU/BRIGHT Wheel
Lock Button
Display
DELETE Index
Screen
Deletion
Confirmation
Screen
PLAYBACK
Advanced Features For D.S.C. (cont.)
VIDEO/DSC Switch
(Open the LCD monitor
to access this switch.)
CAUTION:
Do not remove the MultiMediaCard or
perform any other operation (such as
turning off the camcorder) during deletion.
Also, be sure to use the provided AC Power
Adapter/Charger, as the MultiMediaCard
may be corrupted if the battery becomes
exhausted during deletion. If the
MultiMediaCard becomes corrupted,
initialise it. ( pg. 39)
VMD6 EN(02/39) 28/08/00, 15:5038