Filter
Top Products
72 EN
INDEX
Indications (cont.)
Indications Function
●Appears if dubbing of copyguarded signals is attempted while this
camcorder is being used as a recorder. (੬ pg. 45)
●Appears in the following cases when dubbing from a tape to a
MultiMediaCard:
– when no MultiMediaCard is loaded.
– when the MultiMediaCard's memory is full.
– when the MultiMediaCard is not formatted. (੬ pg. 47)
●Appears in the following cases when dubbing still images stored in the
MultiMediaCard’s memory to a tape:
– when condensation occurs.
– when no tape is loaded.
– when the erase protection tab is set to “SAVE”.
– when a tape in another format is loaded.
– when the tape ends. (੬ pg. 46)
Appears if a MultiMediaCard is not loaded when SNAPSHOT is pressed
while the Power Switch is set to “ ” or “ ” and the VIDEO/DSC Switch
is set to “ ”.
Appears when there is a problem with a MultiMediaCard and its memory is
corrupt, or it has not been initialised. Initialise the MultiMediaCard.
(੬ pg. 39)
Appears if there are no images stored in the MultiMediaCard when the
Power Switch is set to “ ” and the VIDEO/DSC Switch is set to “ ”.
The error indications (E01 — E06) show what type of malfunction has
occured. When an error indication appears, the camcorder turns off
automatically. Remove the power supply (battery, etc.) and wait a few
minutes for the indication to clear. When it does, you can resume using the
camcorder. If the indication remains, consult your nearest THOMSON
dealer.
NO STORED IMAGE
E01 — E06
UNIT IN SAFEGUARD
MODE REMOVE AND
REATTACH BATTERY
PLEASE
FORMAT
MEMORY CARD!
COPYING FAILED
VMD6 EN(40/80) 28/08/00, 16:0872