Filter
Top Products
(7/16)
D4153497A
(9) Masking correction ON fixed
* When Raw output mode(8/10bit),
Masking correction function is disabled (OFF fixed).
(10) White balance OPWB/MWB switching (initial factory setting: MWB)
-OPWB (One Push White Balance)
Effective range 2500 K to 6500 K
Effective area Full screen
* When the random shutter is active, OPWB function is disabled.
* When Raw output mode (8/10bit), OPWB function is disabled.
-MWB (Manual White Balance)
Setting range 2500 K to 6500 K
Setting method R-gain and B-gain can be set independently.
* When Raw output mode (8/10bit), MWB setting is disabled.
(11) Setup-level 6.3 to 25 % (192step)
initial factory setting: 6.3% [Approximately 16digit/8bit]
(12) Power supply DC 12V +/-10% (ripple 100 mV(p-p) or less)
(13) Power consumption 3W (Maximum)
[Internal sync signal specification]
(1) Base clock frequency 36.0000 MHz +/- 100ppm
[Trigger signal specification]
(1) External trigger input
Input level Low level: 0 to 0.5V
High level: 2.0 to 5.0V
Polarity Positive/Negative bipolar (initial factory setting: Negative)
Pulse width 2µs (minimum)
Input impedance High impedance
(2) Software trigger Set via the Gigabit Ethernet interface
[Output signal specification]
(1) BUSY_OUT The period that input of the trigger signal is forbidden.
- Output level LVTTL
- Polarity Positive
(2) EXPOSE_OUT The period that this camera exposes.
- Output level LVTTL
- Polarity Positive