Filter
Top Products
22
䋨
䋨䋨
䋨3䋩
䋩䋩
䋩 WHT BAL(White Balance)
The WHT BAL has three modes; AWB, ATW, MANUAL.
Move the “ ” to MODE, push the [DATA UP], [DATA DOWN], and select one of the three modes :
AWB, ATW, MANUAL.
㸢
䋨
䋨䋨
䋨3䋮
䋮䋮
䋮1䋩
䋩䋩
䋩 Changing the setting in AWB(Automatic White Balance) mode
White balance mode setting AWB, ATW, MANUAL
Color temperature setting 3200K, 5600K
-- 3 WHT BAL -- <FILE A>
R PAINT adjustment -10 to 10
MODE AWB
C TEMP 3200K
B PAINT adjustment -10 to 10
R PAINT 0
B PAINT 0
AWB area
AREA PRESET A
PRESET A, PRESET B, PRESET C, PRESET D, PRESET E
(a) Changing color temperature setting
㽲 Move the “㸢” to C.TEMP by pushing [MENU UP], [MENU DOWN] buttons.
㽳 Select either 3200K or 5600K by pushing [DATA UP], [DATA DOWN] buttons.
(b) Changing R PAINT
㽲 Move the “㸢” to R PAINT by pushing [MENU UP], [MENU DOWN] buttons.
㽳 Select the desired value of red paint by pushing [DATA UP], [DATA DOWN] buttons.
䌛DATA UP䌝 Red is increased.
䋭10 0 10
Red is decreased. 䌛DATA DOWN䌝
(c) Changing B PAINT
㽲 Move the “㸢” to B PAINT by pushing [MENU UP], [MENU DOWN] buttons.
㽳 Select the desired value of blue paint by pushing [DATA UP], [DATA DOWN] buttons.
䌛DATA UP䌝 Blue is increased.
䋭10 0 10
Blue is decreased. 䌛DATA DOWN䌝
(d) Confirming the contents of the zone area selected by AWB
㽲 Move the “㸢” to AREA DISP by pushing [MENU UP], [MENU DOWN] buttons.
㽳 Select the desired area by pushing [DATA UP], [DATA DOWN] buttons.
Move up and down
by pushing
MENU UP,DOWN
Select the desired
value by pushing
DATA UP,DOWN