Filter
Top Products
12
(1) MANUAL(Manual gain)
Gain adjustment is performed on the GAIN menu. The adjustment range is from 0 to 12dB in 1dB steps.
(Refer to the item “7.3 (2) (2.1) Changing gain in MANUAL mode”.)
(2) OFF
Gain is fixed at 0 dB.
5 3 Switching I/P mode
52 Gain
Note:
White, red, green, or blue dots may occur when the gain is increased. This is not a malfunction, just
certain characteristics of the CMOS sensor becoming more visible.
1080 progressive and 1080 interlace for the video output mode can be selected.
By turning on power while [DATA UP], [DATA DOWN] button is pressed, the output mode is switched.
When switching the video output to "1080p", turn on power while [DATA UP] button is pressed.
Output mode becomes 1080 progressive mode. "1080p" is displayed on the screen.
When switching the video output to "1080i", turn on power while [DATA DOWN] button is pressed.
Output mode becomes 1080 interlace mode. "1080i" is displayed on the screen.
When the image is dark even if the lens iris is open, change the gain (video gain) to get the desired video level.
For gain adjustment of the unit, MANUAL (Manual), OFF (0 dB) modes are provided. Select the mode on
the GAIN menu. (Refer to the item “7.3 (2) GAIN (Video gain)”.)