Filter
Top Products
13
(1. 2) Changing each setting in SS (synchro. scan) mode
(a) Changing the shutter speed setting
1
Set the "→" to SS by pushing [MENU UP], [MENU DOWN] buttons.
2
Select the shutter speed by pushing [DATA UP], [DATA DOWN] buttons.
(b) Partial scanning setting
1
Set the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.
2
Select either OFF/60fps/90fps/E.60fps/E.90fps by pushing [DATA UP], [DATA DOWN] buttons.
Note:
The slow shutter speed may increase the fixed pattern noise and/or the white pixels. This is a charac-
teristic of CCD, and is not a symptom of malfunction.
OFF : 1H/796H↔795H/796H↔OFF↔2FRM↔512FRM
60fps, E.60fps : 1H/387H↔386H/387H↔OFF↔2FRM↔512FRM
90fps, E.90fps : 1H/258H↔257H/258H↔OFF↔2FRM↔512FRM
• Shutter mode MANU, SS, E.TRG
• Synchro. scanning setting
• Partial scanning switch
OFF/60fps/90fps/E.60fps/E.90fps
-- SHUTTER --
MODE SS
SS OFF
PART
OFF
<MODE = SS>
Move up down
By pushing
MENU UP, DOWN
Set by pushing
DATA UP, DOWN