Toshiba IK-WD05A Security Camera User Manual


 
12
First, follow the instructions below to remove the dome cover. Flip the black
retention tabs in the counter-clockwise direction to release the dome cover
(clockwise if you look from the bottom up.)
Clear cover
Record the MAC address before
installing the camera.
Hardware Installation
Then remove the black cover as shown below.
Tilt Adjustment Screws
Lens Cover
Mounting hole
Dome cover
NOTE
Protection lm is placed on the lens at the factory. In order to protect the lens,
do not remove until lens adjustment is completed.
(Refer to “completion” on page 20.)