Filter
Top Products
29944AG 61
PTZ Address Settings
Some protocols support software address settings.
The RX Addresses and ID settings are compatible with a particular
line of receivers that support 2 ID addresses.
The PT Driver Address is associated with the PTZ ID address set
on the camera. The addresses must match for the recorder to
communicate with the proper PTZ camera. This is especially
important when a large number of PTZ cameras are connected to
the recorder.
Note To select a PT Driver Address of 129-254, manually
enter the ID in the box.
ACCESSING PTZ MENUS
Some protocols support the ability to access the
Internal PTZ Onscreen menu.
Since every PTZ camera is different, the functions of
these options can vary slightly.
The Surveillix recorder provides an easy way to
access the cameras options. For explanations of
what those options are please refer to the manual
that came with the camera.
Note Use the arrow buttons on the PTZ
controller move through the PTZ menu
options and/or highlight options.
Open PTZ Camera Menu
Arrow buttons
Select Item on Menu
Close PTZ Camera Menu