Filter
Top Products
1717
Adjusting the Lens
Based on the live image retrieved from the camera, adjust the camera lens by doing the
following:
To adjust the viewing angle
1. Loosen the pan adjustment screw and then turn the lens module left and right. Upon
completion, tighten the screw.
2. Loosen the tilt adjustment screws on both side of the camera and then turn the lens
module up and down. Upon completion, tighten the screws.
3. Loosen the rotation adjustment screw and then turn the lens to adjust the image
orientation. Upon completion, tighten screw.
Rotate the screw
Turn the lens
1 2 3 4 1 2 3 4
MIC IN
1 2 3 4
AUDIO OUT
INT. NC
EXT NC
I/O
MIC IN
AUDIO OUT
INT. NC
EXT NC
I/O
MIC IN
AUDIO OUT
INT. NC
EXT NC
I/O
1 2 3 4 1 2 3 4
MIC IN
1 2 3 4
AUDIO OUT
INT. NC
EXT NC
I/O
MIC IN
AUDIO OUT
INT. NC
EXT NC
I/O
MIC IN
AUDIO OUT
INT. NC
EXT NC
I/O
DO NOT over rotate the lens. Doing
so will damage the camera lens
module
3-axis mechanism design and lens direction
The sophisticated 3-axis mechanism design offers very exible, easy hardware
installation for either ceiling or wall mount.
Loosen Tighten
Loosen Tighten
Loosen
Tighten
1
2
3
Pan 350
o
Tilt 85
o
Rotate 350
o
Pan 350
o
Tilt 85
o
Rotate 350
o
Direction
of object
Do not over tighten the tilt adjustment screws. Doing so will
damage the tilt mechanism.