Traveler FX 5 Digital Camera User Manual


 
Helpline No. UK/Ireland 00800/7877 2368
Web Support www.Traveler-service.com/uk
Model Number: FX 5
12
Initial Settings
The language & date/time needs to be set if and when:
The camera is turned on for the first time.
The camera is turned on after leaving the camera without the battery for an extended
period of time.
1. Press the ON/OFF button to turn the power on.
2. Press any button to enter language setup.
Select the displayed language with the
e / f
/
c
/
d
buttons and press the
SET
butto
n.
3. Select the date format with the c / d buttons, and press the SET button.
4. Select the item’s field with the e / f buttons and adjust the value for the date and
time with the c / d buttons.
5.
After confirming all settings are correct
, press
the
SET
b
utton.
Half press the shutter button or press the MENU button will enter capture mode
without saving the settings.
Setting the Date and Time
When the date and time information is not displayed on the LCD monitor, follow these
steps to set the correct date and time.
1. Toggle the button to [8] or [w]; or press the
x
button
.
2. Press the MENU button.
3. Select [Setup] with the f button.
4. Select [Date/Time] with the c / d buttons, and
press the SET button.
5. Select the date format with the c / d buttons,
and press the SET button.
Select the item’s field with the e / f buttons and
adjust the value for the date and time with the c
/ d buttons.
After confirming all settings are correct, press
press the SET button
.
6. To exit from the [Setup] menu, press the MENU
button.
GETTING STARTED
4