Filter
Top Products
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
18
Under Port Settings, select the HTTP Port (80 is the default) and also select the RTSP
Port (554). Under UPnP, click the UPnP checkbox if you want to enable this function.
Click the UPnP Port Forwarding checkbox if you want to enable to set the ports. Select
the External HTTP port and select the RTSP port. If you are using a MAC check the
Bonjour checkbox to enable this function. Click Apply to set the changes.
Wireless Setup
This screen shows the Wireless Settings. Click the Wireless checkbox to enable wireless.
Complete the details in the fields according to your router. Enter a Network Name,
under Site Survey select the SSID from the drop-down list or rescan your network
settings. Select the Wireless Mode from the drop-down list (Infrastructure, Ad-Hoc
mode). Select your Security Mode from the drop-down list. Select from WEP/WPA-
PSK/WPA2-PSK. Finally enter the security key. Click Apply to accept the changes.
WEP – Wired Equivalent Privacy is a security protocol for wireless local area networks
defined in the 802.11b standard. WEP provides the same level of security as that of a
wired LAN.
WPA-PSK -
is a more secured method of wireless encryption. With WPA-PSK you don’t
provide your router with an encryption key but rather a paraphrase.
WPA2-PSK – highly secured method of wireless encryption.