TRENDnet KXTG7872S Security Camera User Manual


 
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
23
the camera will start recording before the allotted time schedule. These times can only
be set in seconds. Click Apply to complete the configuration.
Recording Type
The two main sections here are Snapshot and Video. Snapshot takes a picture from
your recorded data and only works with Profile 3. Video captures source data from
Profiles 1, 2, and 4. and is configurable in Video/Audio settings.
Target - SD Card
These settings depend on the size of your SD card. The larger your SD card the more
storage space you have to record data. Recording data can be recorded in increments of
1-6 minutes. Cyclic settings can also be checked.
Target - Samba Network Device
The Samba Network Device requires a NAS server or a Linux server to operate. Under
Server, enter the server address. Click the Anonymous radio button to allow
anonymous users to send files to the Samba server. Then enter the Share Folder, Sub
Folder (if needed) and enter the disk space needed.
If you click the Account radio button then enter a Username and Password. This will
authenticate the user every time they log on to the samba server.
Video Clip
Click the Video Clip checkbox to activate video recording events.
There are three main sections:
Trigger By: Always, Motion, Schedule,
Video Clip Type: Configure the recording options
Target: The targets available are FTP and E-mail. If you want to record data to an FTP
server, click FTP. If you want to record data to an E-mail account click E-mail.