Filter
Top Products
22
5
USING THE CAMERA
You can access and manage the Wireless Internet Camera through:
1) a web browser, and 2) the enclosed software IPView SE. This
chapter describes the Web Configuration Utility, and provides the
instructions on using the camera with a web browser.
Web Configuration Utility
The Wireless Internet Camera must be configured through its
built-in Web-based Configuration. (Extensive knowledge of LAN
will be helpful in setting up the Wireless Internet Camera.)
From the web browser, enter the default IP address to access the
Welcome screen of the Wireless Internet Camera. To configure
your Wireless Internet Camera, type http://192.168.0.20 in the
address box. The number is the default IP address of your
Wireless Internet Camera. Then, press [Enter].
NOTE: The computer’s IP address must correspond with the
camera’s IP address in the same segment for the two devices
to communicate.