Filter
Top Products
38
DateTime
Click the DateTime item in the left column to setup time and date
for your camera, providing correct information for the remote
users who might be thousands of miles away from the camera’s
location.
- Date & Time: You can set up time and date manually or
automatically by selecting the Synchronized with Time
Server option.
• Synchronized with Time Server: Select this option
and the time will be based on GMT setting. The time
will be synchronized every 10 minutes. When
selecting this option, you have to enter the required
information in the following fields:
IP Address – Enter the IP Address of the Time Server
in this box.
Protocol – Two options of NTP or Time are available
for your selection to link with the Time Server. The
default setting is NTP.
TimeZone – Select the time zone for the region from
the pull-down menu.
• Set Manually: Select this option to set the time
manually. The system administrator must enter the
date and time in the respective field manually.